« Project: RC Handbrake Car | Main | Useful Product Design Resources on the Web »
Monday
Jul262010

My Garage to Studio Conversion - Part 1


I decided to create a blog entry of my experience to convert my single garage into a new studio workspace. I completed about 60% of the work myself.

The reasons to convert the garage into a studio rather than the spare room in the house were simple. Previously I have worked from home and sometimes found it hard to "switch off" as I would be reminded of work to often. Having a workspace outside doesn't just created a physical divide I think it also plays a psychological one too. I began this project around a year ago and started with a list of things I wanted to include within the space;

1. Deskspace for my PC
2. Workbench that could also be used as a second desk
3. Small couch
4. Plenty of shelving to store my books, project files, etc
5. Utility room for a tumble dryer to live (our kitchen has no room for one)
6. Utility sink
7. Tool storage

As you can see from the images on the right the garage door had to go, this was letting cold air into the garage and would prevent efficient heating so I got a local window specialist (http://www.crystalwindows.co.uk/) to fit double PVC-U doors. The difference this made was huge, far more light was entering the space and it meant further work could begin!

Step 1 - Design!
After measuring up it was time for me to get the data into Solidworks. 
It starts with a detailed 2D floor plan which I then extrude heights of doors windows, ledges etc. The single garage is not a very large area so it is important every square inch can be used. Also if you notice from the drawings the end of the garage is not straight, in fact the original owners of the house decided to extend the rear - with a sloping roof to gain about 40cm one side and 55cm on the other - seems a lot of work to me (our theory is that they had a long car they HAD to fit!). 
Anyway, it meant there was an ugly I-beam exposed along with different (and quite badly) joined new brick work. I decided the best idea would be to box in as much as possible and live with the odd shapes. To neatly square the room off and provide a separate area for the utility room I planned to put up a stud wall towards the end of the room. - This also allowed a place for the tumble dryer to sit at and a place to support a work surface the sink could go.
Step 2 - Build the stud wall
Nothing particularly clever about this stage, I had never done this before so a read up what was required. The wall was based on standard 4.5" timber for the uprights, I also wanted to use the wall to support the utility ceiling (to further hide the I-beam and odd extension angles) and this also provided a good storage shelf. I wasn't sure if I was going to place a door onto the wall, but in case I did I insulated the walls to reduce noise from the tumble dryer.

Step 3 – Insulating
Originally the garage offered no insulation and after experiencing a cold winter there was no doubt it needed to be added to create a warmer and more comfortable workspace. Rather than going for the easy cover option I wanted to keep the supporting roof beams exposed so the roof also needed to be insulated. To save space I used aluminium foil, this was simply stapled into place between the roof beams. The outside facing walls were battened and insulated with the foil.


Step 4 – Plaster-boarding and Plastering
A fairly rewarding process because it doesn't take too long to cover a large area. The plaster-boards are simply screwed onto the wooden battens and cut to shape by scoring with a sharp knife and snapping neatly into two. So far I had done all the work, however the next step Plastering was not something I felt confident doing and I have enormous respect for the trade. - If anyone reading this is in the Essex area and needs some plastering then I can't recommend Marc Dickson enough! - His website can be found at http://www.solid-plastering-solutions.co.uk/

Step 5 – Painting and Wood Staining

White, white and white! - Modern crisp and goes with anything! I wanted the space to feel as bright as possible and set the ceiling off (which at this point I didn't quite know what I was going to do) this nondescript shade would also work with any chosen floor and draw the eye towards the wooden roof beams. Before the paint when on a couple of layers of PVA was applied to the plaster. To get that A4 paper density of white six layers of paint were required in some areas. Similar to that the wood stain required about 4 coats which gets old pretty quickly!


Next blog entry, ceiling cladding, flooring, and a custom bookshelf!

 

 

 

 

References (12)

References allow you to track sources for this article, as well as articles that were written in response to this article.
  • Response
    Response: yoga oxford
    My Garage to Studio Conversion - Part 1 - Blog - FusionWeld - My Online Portfolio by Mark Little
  • Response
    Response: www.seacadtech.com
    My Garage to Studio Conversion - Part 1 - Blog - FusionWeld - My Online Portfolio by Mark Little
  • Response
    My Garage to Studio Conversion - Part 1 - Blog - FusionWeld - My Online Portfolio by Mark Little
  • Response
    For this article. I think the authors write very well. Content lively and interesting. Details are as follows:http://www.weissenburg.de/longchamp.asp
  • Response
    My Garage to Studio Conversion - Part 1 - Blog - FusionWeld - My Online Portfolio by Mark Little
  • Response
    My Garage to Studio Conversion - Part 1 - Blog - FusionWeld - My Online Portfolio by Mark Little
  • Response
    My Garage to Studio Conversion - Part 1 - Blog - FusionWeld - My Online Portfolio by Mark Little
  • Response
    My Garage to Studio Conversion - Part 1 - Blog - FusionWeld - My Online Portfolio by Mark Little
  • Response
    My Garage to Studio Conversion - Part 1 - Blog - FusionWeld - My Online Portfolio by Mark Little
  • Response
    My Garage to Studio Conversion - Part 1 - Blog - FusionWeld - My Online Portfolio by Mark Little
  • Response
    My Garage to Studio Conversion - Part 1 - Blog - FusionWeld - My Online Portfolio by Mark Little
  • Response
    Response: do my essay
    If the system holders will be highly educate, than they will be able to develop those devices by which they can check the competency of the politicians. The devices will help them in their work.

Reader Comments (5)

Cool conversion. I am currently thinking of converting mine into a small office. I use my spare bedroom and don't have enough space for all the office files so now I am looking at make the changes as well. You have given me a few ideas for planning it out so thanks.

April 14, 2011 | Unregistered Commenterfrank

Wow! I am in awe as I read this post. You had the perfect plan plus all the handy skills. I'm planning to convert my garage into my craft room. This definitely gives me the boost I need. Thanks for sharing, buddy.

-Kerita Kantz

March 1, 2012 | Unregistered CommenterKerita Kantz

Fantastic idea, it is also one of the best choice of converting a garage. There you can surely enjoy and focus on your own time if you are up to something. Converting it into a studio away from other factors in your home.

July 3, 2012 | Unregistered Commentergarage conversions

Why thank you! I like working in there, and as you said it keeps work away from the home.

July 3, 2012 | Registered CommenterFusionWeld

I have
read your blog story, its very tremendous writing skills saw in your blog, just
keep writing for us...
Garage Conversions suffolk county

PostPost a New Comment

Enter your information below to add a new comment.

My response is on my own website »
Author Email (optional):
Author URL (optional):
Post:
 
Some HTML allowed: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <code> <em> <i> <strike> <strong>